CMOS Circuit Design, Layout, and Simulation, 3rd Edition：Circuit Desing, Layout and Simulation

作者: R. Jacob Baker

出版社: Wiley-IEEE Press

出版时间: 2010-09

ISBN: 9780470881323

装帧: 精装

开本: 其他

纸张: 其他

原版书名: CMOS (2rd Edition)

分类: 外文古旧书>英文书>文学

1人买过

http://cmosedu.com/cmos1/book.htm Russel Jacob (Jake) Baker (S’83-M’88-SM’97) was born in Ogden, Utah, on October 5, 1964. He received the B.S. and M.S. degrees in electrical engineering from the University of Nevada, Las Vegas, in 1986 and 1988. He received the Ph.D. degree in electrical engineering from the University of Nevada, Reno in 1993.
From 1981 to 1987, he served in the United States Marine Corps Reserves. From 1985 to 1993, he worked for E. G. & G. Energy Measurements and the Lawrence Livermore National Laboratory designing nuclear diagnostic instrumentation for underground nuclear weapons tests at the Nevada test site. During this time he designed over 30 electronic and electro-optic instruments including high-speed (750 Mb/s) fiber-optic receiver/transmitters, PLLs, frame- and bit-syncs, data converters, streak-camera sweep circuits, Pockell’s cell drivers, micro-channel plate gating circuits, and analog oscilloscope electronics. From 1993 to 2000, he served on the faculty in the department of electrical engineering at the University of Idaho on the Boise State campus. In 2000, he joined a new electrical and computer engineering program at Boise State University, where he served as department chair from 2004 to 2007. At Boise State he helped establish graduate programs in electrical and computer engineering including, in 2006, the university’s second PhD degree. Also, since 1993, he has consulted for various companies and laboratories including: Aerius Photonics, Arete’ Associates, Amkor, Contour Semiconductor, the Lawrence Berkeley Laboratory, Micron, Nascentric, Oracle, Rendition, Sun, and Tower. His research interests lie in analog/mixed-signal integrated circuit design (combining analog circuit design with digital signal processing) and the design of memory/displays/imagers (arrays) in new and emerging fabrication technologies.
Jake holds over 200 granted or pending patents in integrated circuit design. Among his inventions is the K-Delta-1-Sigma modulator topology used in the Baker analog-to-digital converter. He is a member of the electrical engineering honor society Eta Kappa Nu, a licensed Professional Engineer, and the author of the books CMOS Circuit Design, Layout, and Simulation, CMOS Mixed-Signal Circuit Design, and a coauthor of DRAM Circuit Design: Fundamental and High-Speed Topics. He received the 2000 Best Paper Award from the IEEE Power Electronics Society, the 2007 Frederick Emmons Terman Award, and the 2011 IEEE Circuits and Systems (CAS) Education Award. Jake currently serves on the IEEE Solid-State Circuits Society Administrative Committee (AdCom) and as editor for the Wiley-IEEE Press book Series on Microelectronic Systems. Brief Contents
Chapter 1 Introduction to CMOS Design 1
Chapter 2 The Well 31
Chapter 3 The Metal Layers 59
Chapter 4 The Active and Poly Layers 83
Chapter 5 Resistors, Capacitors, MOSFETs 105
Chapter 6 MOSFET Operation 131
Chapter 7 CMOS Fabrication by Jeff Jessing 161
Chapter 8 Electrical Noise: An Overview 213
Chapter 9 Models for Analog Design 269
Chapter 10 Models for Digital Design 311
Chapter 11 The Inverter 331
Chapter 12 Static Logic Gates 353
Chapter 13 Clocked Circuits 375
Chapter 14 Dynamic Logic Gates 397
Chapter 15 VLSI Layout Examples 411
Chapter 16 Memory Circuits 433
Chapter 17 Sensing Using Modulation 483
Chapter 18 Special Purpose CMOS Circuits 523
Chapter 19 Digital Phase-Locked Loops 551
Chapter 20 Current Mirrors 613
Chapter 21 Amplifiers 657
Chapter 22 Differential Amplifiers 711
Chapter 23 Voltage References 745
Chapter 24 Operational Amplifiers I 773
Chapter 25 Dynamic Analog Circuits 829
Chapter 26 Operational Amplifiers II 863
Chapter 27 Nonlinear Analog Circuits 909
Chapter 28 Data Converter Fundamentals by Harry Li 931
Chapter 29 Data Converter Architectures by Harry Li 965
Chapter 30 Implementing Data Converters 1023
Chapter 31 Feedback Amplifiers with Harry Li 1099
内容简介:
http://cmosedu.com/cmos1/book.htm
作者简介:
Russel Jacob (Jake) Baker (S’83-M’88-SM’97) was born in Ogden, Utah, on October 5, 1964. He received the B.S. and M.S. degrees in electrical engineering from the University of Nevada, Las Vegas, in 1986 and 1988. He received the Ph.D. degree in electrical engineering from the University of Nevada, Reno in 1993.
From 1981 to 1987, he served in the United States Marine Corps Reserves. From 1985 to 1993, he worked for E. G. & G. Energy Measurements and the Lawrence Livermore National Laboratory designing nuclear diagnostic instrumentation for underground nuclear weapons tests at the Nevada test site. During this time he designed over 30 electronic and electro-optic instruments including high-speed (750 Mb/s) fiber-optic receiver/transmitters, PLLs, frame- and bit-syncs, data converters, streak-camera sweep circuits, Pockell’s cell drivers, micro-channel plate gating circuits, and analog oscilloscope electronics. From 1993 to 2000, he served on the faculty in the department of electrical engineering at the University of Idaho on the Boise State campus. In 2000, he joined a new electrical and computer engineering program at Boise State University, where he served as department chair from 2004 to 2007. At Boise State he helped establish graduate programs in electrical and computer engineering including, in 2006, the university’s second PhD degree. Also, since 1993, he has consulted for various companies and laboratories including: Aerius Photonics, Arete’ Associates, Amkor, Contour Semiconductor, the Lawrence Berkeley Laboratory, Micron, Nascentric, Oracle, Rendition, Sun, and Tower. His research interests lie in analog/mixed-signal integrated circuit design (combining analog circuit design with digital signal processing) and the design of memory/displays/imagers (arrays) in new and emerging fabrication technologies.
Jake holds over 200 granted or pending patents in integrated circuit design. Among his inventions is the K-Delta-1-Sigma modulator topology used in the Baker analog-to-digital converter. He is a member of the electrical engineering honor society Eta Kappa Nu, a licensed Professional Engineer, and the author of the books CMOS Circuit Design, Layout, and Simulation, CMOS Mixed-Signal Circuit Design, and a coauthor of DRAM Circuit Design: Fundamental and High-Speed Topics. He received the 2000 Best Paper Award from the IEEE Power Electronics Society, the 2007 Frederick Emmons Terman Award, and the 2011 IEEE Circuits and Systems (CAS) Education Award. Jake currently serves on the IEEE Solid-State Circuits Society Administrative Committee (AdCom) and as editor for the Wiley-IEEE Press book Series on Microelectronic Systems.
目录:
Brief Contents
Chapter 1 Introduction to CMOS Design 1
Chapter 2 The Well 31
Chapter 3 The Metal Layers 59
Chapter 4 The Active and Poly Layers 83
Chapter 5 Resistors, Capacitors, MOSFETs 105
Chapter 6 MOSFET Operation 131
Chapter 7 CMOS Fabrication by Jeff Jessing 161
Chapter 8 Electrical Noise: An Overview 213
Chapter 9 Models for Analog Design 269
Chapter 10 Models for Digital Design 311
Chapter 11 The Inverter 331
Chapter 12 Static Logic Gates 353
Chapter 13 Clocked Circuits 375
Chapter 14 Dynamic Logic Gates 397
Chapter 15 VLSI Layout Examples 411
Chapter 16 Memory Circuits 433
Chapter 17 Sensing Using Modulation 483
Chapter 18 Special Purpose CMOS Circuits 523
Chapter 19 Digital Phase-Locked Loops 551
Chapter 20 Current Mirrors 613
Chapter 21 Amplifiers 657
Chapter 22 Differential Amplifiers 711
Chapter 23 Voltage References 745
Chapter 24 Operational Amplifiers I 773
Chapter 25 Dynamic Analog Circuits 829
Chapter 26 Operational Amplifiers II 863
Chapter 27 Nonlinear Analog Circuits 909
Chapter 28 Data Converter Fundamentals by Harry Li 931
Chapter 29 Data Converter Architectures by Harry Li 965
Chapter 30 Implementing Data Converters 1023
Chapter 31 Feedback Amplifiers with Harry Li 1099