信号完整性与电源完整性分析(第三版)(英文版)

信号完整性与电源完整性分析(第三版)(英文版)
分享
扫描下方二维码分享到微信
打开微信,点击右上角”+“,
使用”扫一扫“即可将网页分享到朋友圈。
2021-03
版次: 1
ISBN: 9787121407833
定价: 119.00
装帧: 其他
开本: 16开
纸张: 胶版纸
页数: 544页
字数: 1132千字
13人买过
  • 本书全面论述了信号完整性与电源完整性问题。主要讲述信号与电源完整性分析及物理设计概论,4类信号与电源完整性问题的实质含义,物理互连设计对信号完整性的影响,电容、电感、电阻和电导的特性分析,求解信号与电源完整性问题的4种实用技术途径,推导和仿真背后隐藏的解决方案,以及改进信号与电源完整性的推荐设计准则等。本书还讨论了信号与电源完整性中S参数的应用问题,并给出了电源分配网络的设计实例。本书强调直觉理解、实用工具和工程素养。作者以实践专家的视角指出造成信号与电源完整性问题的根源,并特别给出了设计阶段前期的问题解决方案。 Eric Bogatin beTheSignal.com网站Teledyne LeCroy Signal Integrity Academy的院长,美国科罗拉多大学博尔德分校电气、计算机与能源工程(ECEE)系兼职教授。Bogatin于麻省理工学院获得物理学士学位,于亚利桑那大学图森分校获得物理学硕士和博士学位。在全球范围内提供有关信号完整性的课程和讲座,并于2013年起通过网站为个人和公司提供在线培训课程。Bogatin是DesignCon的2016年度工程师奖的获得者。

    Eric Bogatin beTheSignal.com网站Teledyne LeCroy Signal Integrity Academy的院长,美国科罗拉多大学博尔德分校电气、计算机与能源工程(ECEE)系兼职教授。Bogatin于麻省理工学院获得物理学士学位,于亚利桑那大学图森分校获得物理学硕士和博士学位。在全球范围内提供有关信号完整性的课程和讲座,并于2013年起通过网站为个人和公司提供在线培训课程。Bogatin是DesignCon的2016年度工程师奖的获得者。 Chapter 1 Signal Integrity Is in Your Future 

    1.1 What Are Signal Integrity, Power Integrity, and Electromagnetic Compatibility? 

    1.2 Signal-Integrity Effects on One Net 

    1.3 Cross Talk 

    1.4 Rail-Collapse Noise 

    1.5 ElectroMagnetic Interference (EMI) 

    1.6 Two Important Signal-Integrity Generalizations 

    1.7 Trends in Electronic Products 

    1.8 The Need for a New Design Methodology 

    1.9 A New Product Design Methodology 

    1.10 Simulations 

    1.11 Modeling and Models 

    1.12 Creating Circuit Models from Calculation 

    1.13 Three Types of Measurements 

    1.14 The Role of Measurements 

    1.15 The Bottom Line 

    Chapter 2 Time and Frequency Domains 

    2.1 The Time Domain 

    2.2 Sine Waves in the Frequency Domain 

    2.3 Shorter Time to a Solution in the Frequency Domain 

    2.4 Sine-Wave Features 

    2.5 The Fourier Transform 

    2.6 The Spectrum of a Repetitive Signal 

    2.7 The Spectrum of an Ideal Square Wave 

    2.8 From the Frequency Domain to the Time Domain 

    2.9 Effect of Bandwidth on Rise Time 

    2.10 Bandwidth and Rise Time 

    2.11 What Does Significant Mean? 

    2.12 Bandwidth of Real Signals 

    2.13 Bandwidth and Clock Frequency 

    2.14 Bandwidth of a Measurement 

    2.15 Bandwidth of a Model 

    2.16 Bandwidth of an Interconnect 

    2.17 The Bottom Line 

    Chapter 3 Impedance and Electrical Models 

    3.1 Describing Signal-Integrity Solutions in Terms of Impedance 

    3.2 What Is Impedance? 

    3.3 Real Versus Ideal Circuit Elements 

    3.4 Impedance of an Ideal Resistor in the Time Domain 

    3.5 Impedance of an Ideal Capacitor in the Time Domain 

    3.6 Impedance of an Ideal Inductor in the Time Domain 

    3.7 Impedance in the Frequency Domain 

    3.8 Equivalent Electrical Circuit Models 

    3.9 Circuit Theory and SPICE 

    3.10 Introduction to Measurement-Based Modeling 

    3.11 The Bottom Line 

    Chapter 4 The Physical Basis of Resistance 

    4.1 Translating Physical Design into Electrical Performance 

    4.2 The Only Good Approximation for the Resistance of Interconnects 

    4.3 Bulk Resistivity 

    4.4 Resistance per Length 

    4.5 Sheet Resistance 

    4.6 The Bottom Line 

    Chapter 5 The Physical Basis of Capacitance 

    5.1 Current Flow in Capacitors 

    5.2 The Capacitance of a Sphere 

    5.3 Parallel Plate Approximation 

    5.4 Dielectric Constant 

    5.5 Power and Ground Planes and Decoupling Capacitance 

    5.6 Capacitance per Length 

    5.7 2D Field Solvers 

    5.8 Effective Dielectric Constant 

    5.9 The Bottom Line 

    Chapter 6 The Physical Basis of Inductance 

    6.1 What Is Inductance? 

    6.2 Inductance Principle 1: There Are Circular Rings of Magnetic-Field Lines Around All Currents 

    6.3 Inductance Principle 2: Inductance Is the Number of Webers of Field Line Rings Around a Conductor per Amp of Current Through It 

    6.4 Self-Inductance and Mutual Inductance 

    6.5 Inductance Principle 3: When the Number of Field Line Rings Around a Conductor Changes, There Will Be a Voltage Induced Across the Ends of the Conductor 

    6.6 Partial Inductance 

    6.7 Effective, Total, or Net Inductance and Ground Bounce 

    6.8 Loop Self- and Mutual Inductance 

    6.9 The Power Distribution Network (PDN) and Loop Inductance 

    6.10 Loop Inductance per Square of Planes 

    6.11 Loop Inductance of Planes and Via Contacts 

    6.12 Loop Inductance of Planes with a Field of Clearance Holes 

    6.13 Loop Mutual Inductance 

    6.14 Equivalent Inductance of Multiple Inductors 

    6.15 Summary of Inductance 

    6.16 Current Distributions and Skin Depth 

    6.17 High-Permeability Materials 

    6.18 Eddy Currents 

    6.19 The Bottom Line 

    Chapter 7 The Physical Basis of Transmission Lines 

    7.1 Forget the Word Ground 

    7.2 The Signal 

    7.3 Uniform Transmission Lines 

    7.4 The Speed of Electrons in Copper 

    7.5 The Speed of a Signal in a Transmission Line 

    7.6 Spatial Extent of the Leading Edge 

    7.7 “Be the Signal” 

    7.8 The Instantaneous Impedance of a Transmission Line 

    7.9 Characteristic Impedance and Controlled Impedance 

    7.10 Famous Characteristic Impedances 

    7.11 The Impedance of a Transmission Line 

    7.12 Driving a Transmission Line 

    7.13 Return Paths 

    7.14 When Return Paths Switch Reference Planes 

    7.15 A First-Order Model of a Transmission Line 

    7.16 Calculating Characteristic Impedance with Approximations 

    7.17 Calculating the Characteristic Impedance with a 2D Field Solver 

    7.18 An n-Section Lumped-Circuit Model 

    7.19 Frequency Variation of the Characteristic Impedance 

    7.20 The Bottom Line 

    Chapter 8 Transmission Lines and Reflections 

    8.1 Reflections at Impedance Changes 

    8.2 Why Are There Reflections? 

    8.3 Reflections from Resistive Loads 

    8.4 Source Impedance 

    8.5 Bounce Diagrams 

    8.6 Simulating Reflected Waveforms 

    8.7 Measuring Reflections with a TDR 

    8.8 Transmission Lines and Unintentional Discontinuities 

    8.9 When to Terminate 

    8.10 The Most Common Termination Strategy for Point-to-Point Topology 

    8.11 Reflections from Short Series Transmission Lines 

    8.12 Reflections from Short-Stub Transmission Lines 

    8.13 Reflections from Capacitive End Terminations 

    8.14 Reflections from Capacitive Loads in the Middle of a Trace 

    8.15 Capacitive Delay Adders 

    8.16 Effects of Corners and Vias 

    8.17 Loaded Lines 

    8.18 Reflections from Inductive Discontinuities 

    8.19 Compensation 

    8.20 The Bottom Line 

    Chapter 9 Lossy Lines, Rise-Time Degradation, and Material Properties 

    9.1 Why Worry About Lossy Lines? 

    9.2 Losses in Transmission Lines 

    9.3 Sources of Loss: Conductor Resistance and Skin Depth 

    9.4 Sources of Loss: The Dielectric 

    9.5 Dissipation Factor 

    9.6 The Real Meaning of Dissipation Factor 

    9.7 Modeling Lossy Transmission Lines 

    9.8 Characteristic Impedance of a Lossy Transmission Line 

    9.9 Signal Velocity in a Lossy Transmission Line 

    9.10 Attenuation and dB 

    9.11 Attenuation in Lossy Lines 

    9.12 Measured Properties of a Lossy Line in the Frequency Domain 

    9.13 The Bandwidth of an Interconnect 

    9.14 Time-Domain Behavior of Lossy Lines 

    9.15 Improving the Eye Diagram of a Transmission Line 

    9.16 How Much Attenuation Is Too Much? 

    9.17 The Bottom Line 

    Chapter 10 Cross Talk in Transmission Lines 

    10.1 Superposition 

    10.2 Origin of Coupling: Capacitance and Inductance 

    10.3 Cross Talk in Transmission Lines: NEXT and FEXT 

    10.4 Describing Cross Talk 

    10.5 The SPICE Capacitance Matrix 

    10.6 The Maxwell Capacitance Matrix and 2D Field Solvers 

    10.7 The Inductance Matrix 

    10.8 Cross Talk in Uniform Transmission Lines and Saturation Length 

    10.9 Capacitively Coupled Currents 

    10.10 Inductively Coupled Currents 

    10.11 Near-End Cross Talk 

    10.12 Far-End Cross Talk 

    10.13 Decreasing Far-End Cross Talk 

    10.14 Simulating Cross Talk 

    10.15 Guard Traces 

    10.16 Cross Talk and Dielectric Constant 

    10.17 Cross Talk and Timing 

    10.18 Switching Noise 

    10.19 Summary of Reducing Cross Talk 

    10.20 The Bottom Line 

    Chapter 11 Differential Pairs and Differential Impedance 

    11.1 Differential Signaling 

    11.2 A Differential Pair 

    11.3 Differential Impedance with No Coupling 

    11.4 The Impact from Coupling 

    11.5 Calculating Differential Impedance 

    11.6 The Return-Current Distribution in a Differential Pair 

    11.7 Odd and Even Modes 

    11.8 Differential Impedance and Odd-Mode Impedance 

    11.9 Common Impedance and Even-Mode Impedance 

    11.10 Differential and Common Signals and Odd- and Even-Mode Voltage Components 

    11.11 Velocity of Each Mode and Far-End Cross Talk 

    11.12 Ideal Coupled Transmission-Line Model or an Ideal Differential Pair 

    11.13 Measuring Even- and Odd-Mode Im
  • 内容简介:
    本书全面论述了信号完整性与电源完整性问题。主要讲述信号与电源完整性分析及物理设计概论,4类信号与电源完整性问题的实质含义,物理互连设计对信号完整性的影响,电容、电感、电阻和电导的特性分析,求解信号与电源完整性问题的4种实用技术途径,推导和仿真背后隐藏的解决方案,以及改进信号与电源完整性的推荐设计准则等。本书还讨论了信号与电源完整性中S参数的应用问题,并给出了电源分配网络的设计实例。本书强调直觉理解、实用工具和工程素养。作者以实践专家的视角指出造成信号与电源完整性问题的根源,并特别给出了设计阶段前期的问题解决方案。
  • 作者简介:
    Eric Bogatin beTheSignal.com网站Teledyne LeCroy Signal Integrity Academy的院长,美国科罗拉多大学博尔德分校电气、计算机与能源工程(ECEE)系兼职教授。Bogatin于麻省理工学院获得物理学士学位,于亚利桑那大学图森分校获得物理学硕士和博士学位。在全球范围内提供有关信号完整性的课程和讲座,并于2013年起通过网站为个人和公司提供在线培训课程。Bogatin是DesignCon的2016年度工程师奖的获得者。

    Eric Bogatin beTheSignal.com网站Teledyne LeCroy Signal Integrity Academy的院长,美国科罗拉多大学博尔德分校电气、计算机与能源工程(ECEE)系兼职教授。Bogatin于麻省理工学院获得物理学士学位,于亚利桑那大学图森分校获得物理学硕士和博士学位。在全球范围内提供有关信号完整性的课程和讲座,并于2013年起通过网站为个人和公司提供在线培训课程。Bogatin是DesignCon的2016年度工程师奖的获得者。
  • 目录:
    Chapter 1 Signal Integrity Is in Your Future 

    1.1 What Are Signal Integrity, Power Integrity, and Electromagnetic Compatibility? 

    1.2 Signal-Integrity Effects on One Net 

    1.3 Cross Talk 

    1.4 Rail-Collapse Noise 

    1.5 ElectroMagnetic Interference (EMI) 

    1.6 Two Important Signal-Integrity Generalizations 

    1.7 Trends in Electronic Products 

    1.8 The Need for a New Design Methodology 

    1.9 A New Product Design Methodology 

    1.10 Simulations 

    1.11 Modeling and Models 

    1.12 Creating Circuit Models from Calculation 

    1.13 Three Types of Measurements 

    1.14 The Role of Measurements 

    1.15 The Bottom Line 

    Chapter 2 Time and Frequency Domains 

    2.1 The Time Domain 

    2.2 Sine Waves in the Frequency Domain 

    2.3 Shorter Time to a Solution in the Frequency Domain 

    2.4 Sine-Wave Features 

    2.5 The Fourier Transform 

    2.6 The Spectrum of a Repetitive Signal 

    2.7 The Spectrum of an Ideal Square Wave 

    2.8 From the Frequency Domain to the Time Domain 

    2.9 Effect of Bandwidth on Rise Time 

    2.10 Bandwidth and Rise Time 

    2.11 What Does Significant Mean? 

    2.12 Bandwidth of Real Signals 

    2.13 Bandwidth and Clock Frequency 

    2.14 Bandwidth of a Measurement 

    2.15 Bandwidth of a Model 

    2.16 Bandwidth of an Interconnect 

    2.17 The Bottom Line 

    Chapter 3 Impedance and Electrical Models 

    3.1 Describing Signal-Integrity Solutions in Terms of Impedance 

    3.2 What Is Impedance? 

    3.3 Real Versus Ideal Circuit Elements 

    3.4 Impedance of an Ideal Resistor in the Time Domain 

    3.5 Impedance of an Ideal Capacitor in the Time Domain 

    3.6 Impedance of an Ideal Inductor in the Time Domain 

    3.7 Impedance in the Frequency Domain 

    3.8 Equivalent Electrical Circuit Models 

    3.9 Circuit Theory and SPICE 

    3.10 Introduction to Measurement-Based Modeling 

    3.11 The Bottom Line 

    Chapter 4 The Physical Basis of Resistance 

    4.1 Translating Physical Design into Electrical Performance 

    4.2 The Only Good Approximation for the Resistance of Interconnects 

    4.3 Bulk Resistivity 

    4.4 Resistance per Length 

    4.5 Sheet Resistance 

    4.6 The Bottom Line 

    Chapter 5 The Physical Basis of Capacitance 

    5.1 Current Flow in Capacitors 

    5.2 The Capacitance of a Sphere 

    5.3 Parallel Plate Approximation 

    5.4 Dielectric Constant 

    5.5 Power and Ground Planes and Decoupling Capacitance 

    5.6 Capacitance per Length 

    5.7 2D Field Solvers 

    5.8 Effective Dielectric Constant 

    5.9 The Bottom Line 

    Chapter 6 The Physical Basis of Inductance 

    6.1 What Is Inductance? 

    6.2 Inductance Principle 1: There Are Circular Rings of Magnetic-Field Lines Around All Currents 

    6.3 Inductance Principle 2: Inductance Is the Number of Webers of Field Line Rings Around a Conductor per Amp of Current Through It 

    6.4 Self-Inductance and Mutual Inductance 

    6.5 Inductance Principle 3: When the Number of Field Line Rings Around a Conductor Changes, There Will Be a Voltage Induced Across the Ends of the Conductor 

    6.6 Partial Inductance 

    6.7 Effective, Total, or Net Inductance and Ground Bounce 

    6.8 Loop Self- and Mutual Inductance 

    6.9 The Power Distribution Network (PDN) and Loop Inductance 

    6.10 Loop Inductance per Square of Planes 

    6.11 Loop Inductance of Planes and Via Contacts 

    6.12 Loop Inductance of Planes with a Field of Clearance Holes 

    6.13 Loop Mutual Inductance 

    6.14 Equivalent Inductance of Multiple Inductors 

    6.15 Summary of Inductance 

    6.16 Current Distributions and Skin Depth 

    6.17 High-Permeability Materials 

    6.18 Eddy Currents 

    6.19 The Bottom Line 

    Chapter 7 The Physical Basis of Transmission Lines 

    7.1 Forget the Word Ground 

    7.2 The Signal 

    7.3 Uniform Transmission Lines 

    7.4 The Speed of Electrons in Copper 

    7.5 The Speed of a Signal in a Transmission Line 

    7.6 Spatial Extent of the Leading Edge 

    7.7 “Be the Signal” 

    7.8 The Instantaneous Impedance of a Transmission Line 

    7.9 Characteristic Impedance and Controlled Impedance 

    7.10 Famous Characteristic Impedances 

    7.11 The Impedance of a Transmission Line 

    7.12 Driving a Transmission Line 

    7.13 Return Paths 

    7.14 When Return Paths Switch Reference Planes 

    7.15 A First-Order Model of a Transmission Line 

    7.16 Calculating Characteristic Impedance with Approximations 

    7.17 Calculating the Characteristic Impedance with a 2D Field Solver 

    7.18 An n-Section Lumped-Circuit Model 

    7.19 Frequency Variation of the Characteristic Impedance 

    7.20 The Bottom Line 

    Chapter 8 Transmission Lines and Reflections 

    8.1 Reflections at Impedance Changes 

    8.2 Why Are There Reflections? 

    8.3 Reflections from Resistive Loads 

    8.4 Source Impedance 

    8.5 Bounce Diagrams 

    8.6 Simulating Reflected Waveforms 

    8.7 Measuring Reflections with a TDR 

    8.8 Transmission Lines and Unintentional Discontinuities 

    8.9 When to Terminate 

    8.10 The Most Common Termination Strategy for Point-to-Point Topology 

    8.11 Reflections from Short Series Transmission Lines 

    8.12 Reflections from Short-Stub Transmission Lines 

    8.13 Reflections from Capacitive End Terminations 

    8.14 Reflections from Capacitive Loads in the Middle of a Trace 

    8.15 Capacitive Delay Adders 

    8.16 Effects of Corners and Vias 

    8.17 Loaded Lines 

    8.18 Reflections from Inductive Discontinuities 

    8.19 Compensation 

    8.20 The Bottom Line 

    Chapter 9 Lossy Lines, Rise-Time Degradation, and Material Properties 

    9.1 Why Worry About Lossy Lines? 

    9.2 Losses in Transmission Lines 

    9.3 Sources of Loss: Conductor Resistance and Skin Depth 

    9.4 Sources of Loss: The Dielectric 

    9.5 Dissipation Factor 

    9.6 The Real Meaning of Dissipation Factor 

    9.7 Modeling Lossy Transmission Lines 

    9.8 Characteristic Impedance of a Lossy Transmission Line 

    9.9 Signal Velocity in a Lossy Transmission Line 

    9.10 Attenuation and dB 

    9.11 Attenuation in Lossy Lines 

    9.12 Measured Properties of a Lossy Line in the Frequency Domain 

    9.13 The Bandwidth of an Interconnect 

    9.14 Time-Domain Behavior of Lossy Lines 

    9.15 Improving the Eye Diagram of a Transmission Line 

    9.16 How Much Attenuation Is Too Much? 

    9.17 The Bottom Line 

    Chapter 10 Cross Talk in Transmission Lines 

    10.1 Superposition 

    10.2 Origin of Coupling: Capacitance and Inductance 

    10.3 Cross Talk in Transmission Lines: NEXT and FEXT 

    10.4 Describing Cross Talk 

    10.5 The SPICE Capacitance Matrix 

    10.6 The Maxwell Capacitance Matrix and 2D Field Solvers 

    10.7 The Inductance Matrix 

    10.8 Cross Talk in Uniform Transmission Lines and Saturation Length 

    10.9 Capacitively Coupled Currents 

    10.10 Inductively Coupled Currents 

    10.11 Near-End Cross Talk 

    10.12 Far-End Cross Talk 

    10.13 Decreasing Far-End Cross Talk 

    10.14 Simulating Cross Talk 

    10.15 Guard Traces 

    10.16 Cross Talk and Dielectric Constant 

    10.17 Cross Talk and Timing 

    10.18 Switching Noise 

    10.19 Summary of Reducing Cross Talk 

    10.20 The Bottom Line 

    Chapter 11 Differential Pairs and Differential Impedance 

    11.1 Differential Signaling 

    11.2 A Differential Pair 

    11.3 Differential Impedance with No Coupling 

    11.4 The Impact from Coupling 

    11.5 Calculating Differential Impedance 

    11.6 The Return-Current Distribution in a Differential Pair 

    11.7 Odd and Even Modes 

    11.8 Differential Impedance and Odd-Mode Impedance 

    11.9 Common Impedance and Even-Mode Impedance 

    11.10 Differential and Common Signals and Odd- and Even-Mode Voltage Components 

    11.11 Velocity of Each Mode and Far-End Cross Talk 

    11.12 Ideal Coupled Transmission-Line Model or an Ideal Differential Pair 

    11.13 Measuring Even- and Odd-Mode Im
查看详情
相关图书 / 更多
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统(第2版)
孙爱晶
信号完整性与电源完整性分析(第三版)(英文版)
信号检测与估计(第3版)
张立毅;张雄;李化
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统——基于MATLAB的方法(第2版)
谭鸽伟;冯桂;黄公彝;胡朝炜
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统(第二版)()
张宇 著
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统分析(第3版)——导学与习题解答
安成锦 杨威 范崇·t 游鹏 编著;吴京 主编
信号完整性与电源完整性分析(第三版)(英文版)
信号分析与处理
赵子健
信号完整性与电源完整性分析(第三版)(英文版)
信号.上
金恩熙 著;磨铁文化 出品
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统(微课版 支持H5交互)
北京邮电大学信号与系统课程组
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统(第3版)学习指导与习题全解
陈后金
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统——使用MATLAB分析与实现(第2版)
高宝建;彭进业;王琳;潘建寿
信号完整性与电源完整性分析(第三版)(英文版)
信号与系统简明教程
郭铁梁
信号完整性与电源完整性分析(第三版)(英文版)
信号.下
金恩熙 著;磨铁文化 出品
您可能感兴趣 / 更多
信号完整性与电源完整性分析(第三版)(英文版)
宇宙视觉史:从宇宙大爆炸到时间的尽头
[美]查尔斯·刘 著;高爽 译者;[美]马克西姆· 马洛维奇科 绘;未读 出品
信号完整性与电源完整性分析(第三版)(英文版)
写出我心 普通人如何通过写作表达自己(平装本)
[美]娜塔莉·戈德堡(Natalie Goldberg)
信号完整性与电源完整性分析(第三版)(英文版)
写出我心3 写作疗愈的真正秘密
[美]娜塔莉·戈德堡(Natalie Goldberg)
信号完整性与电源完整性分析(第三版)(英文版)
神套路:为什么我们总被带节奏(狂热与网红时代醍醐灌顶之作,教给普通人安身立命的不二法门!)
[美]阿里·阿莫萨维 著;[哥伦比亚]亚历杭德罗·希拉尔多 绘
信号完整性与电源完整性分析(第三版)(英文版)
阿伦森自传
[美]埃利奥特·阿伦森(Elliot Aronson) 著;沈捷 译;湛庐文化 出品
信号完整性与电源完整性分析(第三版)(英文版)
街头官僚:公共服务中的个人困境
[美]迈克尔·李普斯基(Michael Lipsky)
信号完整性与电源完整性分析(第三版)(英文版)
史前至蒙古帝国时期的内欧亚大陆史
[美]大卫·克里斯蒂安 著;潘玲 译;杨建华 校
信号完整性与电源完整性分析(第三版)(英文版)
意大利文艺复兴新艺术史
[美]迈克尔·韦恩·科尔 著;[美]斯蒂芬·J·坎贝尔;邵亦杨
信号完整性与电源完整性分析(第三版)(英文版)
老人与海 彩图注音版 一二三四年级5-6-7-8-9岁小学生课外阅读经典 儿童文学无障碍有声伴读世界名著童话故事
[美]海明威
信号完整性与电源完整性分析(第三版)(英文版)
养育的觉醒:全面激发孩子自驱力,教你如何心平气和做妈妈
[美]凯文·莱曼 著;唐晓璐 译;斯坦威 出品
信号完整性与电源完整性分析(第三版)(英文版)
自律我也能做到(全9册)
[美]康妮·科维尔·米勒 著;[阿根廷]维多利亚·阿萨纳利 绘
信号完整性与电源完整性分析(第三版)(英文版)
你在等什么?
[美]斯科特·明钦 著;[中]易万 译;[美]马特 ·斐兰 绘