Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）

Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）

分享

作者: 陈骥编

出版社: 科学出版社

出版时间: 2015-11

版次: 2

ISBN: 9787030463302

定价: 80.00

装帧: 平装

开本: 16开

纸张: 胶版纸

分类: 教材教辅考试>教材>大学教材>工程技术

2人买过

　　陈骥编*的《钢结构构件的扭转分析--理论与设计》介绍了薄壁开口截面扭转屈曲或弯扭屈曲、畸变屈曲、扭转塑性破坏，即均匀扭转塑性破坏和翘曲扭转塑性破坏的理论分析、试验研究和设计问题，包括均匀受扭、约束受扭、沙堆比拟方法和翘曲扭转诸多试验研究和设计问题。

  本书给出了两端简支焊接工形截面，轴心受压柱的扭转屈曲荷载和轴心受压冷弯开口加劲卷边槽钢构件的弹性畸变屈曲荷载的计算实例，并按照澳大利亚冷弯薄壁规范AS／NZS 4600—2005 2nd Ed．确定弹性畸变屈曲荷载的计算实例。

  本书可作为高等院校土建类和力学类专业的研究生教材，也可供相关领域的工程技术人员和科研人员学习和参考。 PREFACE

FOREWORD (2nd Edition)

FOREWORD

SOME SYMBOLS USED IN TEXTBOOK

CHAPTER 1  HISTORY OF TORSION OF STEEL STRUCFURAL MEMBERS

  References

CHAPTER 2  INTRODUCFION

  2.1  Introduction

  2.2  Linear Elastic Torsional Behavior of Steel I-Section Members

  2.3  First yield Condition of Steel Structural Member in Torsion

  2.4  Plastic Collapse Analysis of I-Section Torsion

  2.5  Uniform-Torsion Plastic Collapse

  2.6  Warping Torsion Plastic Collapse

  References

CHAPTER 3  LINEAR ELASTIC TORSIONAL BEHAVIOR

  References

CHAPTER 4  ELASTIC TORSIONAL AND FLEXURAL-TORSIONAL BUCKLING

  OF AXIAL COMPRESSION MEMBERS

  4.1  Elastic Torsional Buckling of Centrally Compressed Members

  4.2  Effect of Residual Stress Distribution on Elastic Torsional

  Buckling Load

  4.3  Effect of End Boundary Conditions on Torsional Buckling Load

  4.4  Elastic Flexural-torsional Buckling of Axial Compression Members

  Problem

  References

CHAPTER 5  ELASTIC DISTORTIONAL BUCKLING OF AXIAL COMPRESSION

  MEMBERS

  5.1  Elastic Section Distortional Buckling Stress

  5.2  Equilibrium Method to Determine Elastic Distortional Buckling Load

  5.3  To Determine Elastic Distortional Buckling Stresses and Loads

  According to Schafer, B.W.and Pekoz, T.Handle Method

  5.4  To Determine Elastic Distortional Buckling Stresses and Loads

  According to AS/NZS 4600--20052ndEd.

  Problem

  References

CHAPTER 6  DISTORTIONAL BUCKLING OF STEEL BI-SYMMETRIC

  I-SECTION BEAMS UNDER IN-PLANE UNIFORM BENDING

  6.1  Theoretical Analysis on Distortional Buckling of Bisymmetric

  I-section Beams

  6.2  Theoretical Analysis on Distortional Buckling of Monosymmetric

  I-section Beams

  References

CHAPTER 7  DISTORTIONAL BUCKLING OF STEEL BI-SYMMETRIC

  I-SFCTION BEAM-COLUMNS

  Distortional Buckling of Steel Bi-symmetric I-section Beam-columns

  References

CHAPTER 8  I-SECTION BEAMS AND BEAM-COLUMNS UNDER BENDING

  AND TORSION

  8.1  Governing Differential Equations of Biaxial Bending Beam with

  Torsion

  8.2  Two Methods to Check Stability for Biaxial Bending Beam with

  Torsion

  Problem

  References

CHAPTER 9  ELASTIC TORSIONAL BEHAVIOR

  References

CHAPTER 10    FIRSt YIELD CONDITION OF STEEL STRUCTURAL MEMBER

  UNDER TORSON

  Linear Elastic Torsional Behavior

  References

CHAPTER 11    INELASTIC TORSIONAL BEHAVIOR

  11.1  Inelastic Torsional Behavior of Lsection Beam

  11.2  Plastic-Collapse Analysis of Torsion

  11.3  Uniform-Torsion Plastic Collapse

  11.4  Conclusions

  References

ANSWERS TO SOME SELECTED PROBLEMS
内容简介:
　　陈骥编*的《钢结构构件的扭转分析--理论与设计》介绍了薄壁开口截面扭转屈曲或弯扭屈曲、畸变屈曲、扭转塑性破坏，即均匀扭转塑性破坏和翘曲扭转塑性破坏的理论分析、试验研究和设计问题，包括均匀受扭、约束受扭、沙堆比拟方法和翘曲扭转诸多试验研究和设计问题。

本书给出了两端简支焊接工形截面，轴心受压柱的扭转屈曲荷载和轴心受压冷弯开口加劲卷边槽钢构件的弹性畸变屈曲荷载的计算实例，并按照澳大利亚冷弯薄壁规范AS／NZS 4600—2005 2nd Ed．确定弹性畸变屈曲荷载的计算实例。

本书可作为高等院校土建类和力学类专业的研究生教材，也可供相关领域的工程技术人员和科研人员学习和参考。
目录:
PREFACE

FOREWORD (2nd Edition)

FOREWORD

SOME SYMBOLS USED IN TEXTBOOK

CHAPTER 1  HISTORY OF TORSION OF STEEL STRUCFURAL MEMBERS

  References

CHAPTER 2  INTRODUCFION

  2.1  Introduction

  2.2  Linear Elastic Torsional Behavior of Steel I-Section Members

  2.3  First yield Condition of Steel Structural Member in Torsion

  2.4  Plastic Collapse Analysis of I-Section Torsion

  2.5  Uniform-Torsion Plastic Collapse

  2.6  Warping Torsion Plastic Collapse

  References

CHAPTER 3  LINEAR ELASTIC TORSIONAL BEHAVIOR

  References

CHAPTER 4  ELASTIC TORSIONAL AND FLEXURAL-TORSIONAL BUCKLING

  OF AXIAL COMPRESSION MEMBERS

  4.1  Elastic Torsional Buckling of Centrally Compressed Members

  4.2  Effect of Residual Stress Distribution on Elastic Torsional

  Buckling Load

  4.3  Effect of End Boundary Conditions on Torsional Buckling Load

  4.4  Elastic Flexural-torsional Buckling of Axial Compression Members

  Problem

  References

CHAPTER 5  ELASTIC DISTORTIONAL BUCKLING OF AXIAL COMPRESSION

  MEMBERS

  5.1  Elastic Section Distortional Buckling Stress

  5.2  Equilibrium Method to Determine Elastic Distortional Buckling Load

  5.3  To Determine Elastic Distortional Buckling Stresses and Loads

  According to Schafer, B.W.and Pekoz, T.Handle Method

  5.4  To Determine Elastic Distortional Buckling Stresses and Loads

  According to AS/NZS 4600--20052ndEd.

  Problem

  References

CHAPTER 6  DISTORTIONAL BUCKLING OF STEEL BI-SYMMETRIC

  I-SECTION BEAMS UNDER IN-PLANE UNIFORM BENDING

  6.1  Theoretical Analysis on Distortional Buckling of Bisymmetric

  I-section Beams

  6.2  Theoretical Analysis on Distortional Buckling of Monosymmetric

  I-section Beams

  References

CHAPTER 7  DISTORTIONAL BUCKLING OF STEEL BI-SYMMETRIC

  I-SFCTION BEAM-COLUMNS

  Distortional Buckling of Steel Bi-symmetric I-section Beam-columns

  References

CHAPTER 8  I-SECTION BEAMS AND BEAM-COLUMNS UNDER BENDING

  AND TORSION

  8.1  Governing Differential Equations of Biaxial Bending Beam with

  Torsion

  8.2  Two Methods to Check Stability for Biaxial Bending Beam with

  Torsion

  Problem

  References

CHAPTER 9  ELASTIC TORSIONAL BEHAVIOR

  References

CHAPTER 10    FIRSt YIELD CONDITION OF STEEL STRUCTURAL MEMBER

  UNDER TORSON

  Linear Elastic Torsional Behavior

  References

CHAPTER 11    INELASTIC TORSIONAL BEHAVIOR

  11.1  Inelastic Torsional Behavior of Lsection Beam

  11.2  Plastic-Collapse Analysis of Torsion

  11.3  Uniform-Torsion Plastic Collapse

  11.4  Conclusions

  References

ANSWERS TO SOME SELECTED PROBLEMS

查看详情

相关分类

一年级二年级三年级四年级五年级六年级小升初小学通用初一初二初三中考

Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）全新正版现货

全新

泽曦雅卷

河南省郑州市

平均发货1小时成功完成率96.12%

￥216.00

券

100减20

立即购买加入购物车
2

Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）

九五品

瑶瑶书阁的书店

河北省衡水市

平均发货5小时成功完成率96.9%

￥248.00

券

100减20

立即购买加入购物车
Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）【正版书籍】【可开发票】【以标题为准，偶有封面不一致，详情可咨询客服】

全新

琍璇书阁

湖南省长沙市

平均发货14小时成功完成率90.31%

￥372.00

券

100减20

立即购买加入购物车不属于本条目
9

Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）正版现货无笔记无划线内页干净品相好详情看图

九五品

你是年少的欢喜

北京市昌平区

平均发货13小时成功完成率88.27%

￥220.00

券

100减20

立即购买加入购物车
Torsional Analysis of Steel Structural Members Theory and Design（2nd Edition）（钢结构构件的扭转分析—理论与设计）（第二版）

九五品

萌萌兔书店

河北省保定市

平均发货11小时成功完成率86.67%

￥150.00

券

100减20

立即购买加入购物车不属于本条目